Stormseal Seam Sealer 100ml - Clear by Stormsure

Stormseal is a water based seam sealer designed for sealing and waterproofing stitched seams, needle holes, and leaking areas on tents, bivvies, waterproof clothing, and similar outdoor gear. It is ideal for resealing seams where the original heat applied seam tape has come loose or degraded. The sealant can also be brushed over larger areas to restore water resistance to perforated or damaged fabric. Stormseal is applied with a brush, allowing for controlled and precise application. The liquid penetrates pinholes and stitch lines, drying to a clear, flexible, and waterproof finish. It contains no VOCs and is non toxic. Before full application, always test Stormseal on a small hidden area to ensure compatibility with the fabric. Apply in inconspicuous locations when possible, as the sealer may slightly alter the fabric appearance or reflect light differently after drying or prolonged sunlight exposure. Stormseal can be cleaned off with water while still wet, but once cured, it becomes permanent and cannot be removed with water.Directions- Clean area. Remove cap and brush on a generous layer Stormseal using the foam pad by gently squeezing the bottle. Allow to seep in and cure for 15-25 minutes or until clear and dry. Pack Size: 1 Includes: Seam Sealer with Applicator Brush and Tray Shipping Weight: 110g The Range Marketplace: Yes Width: 2cm Height: 13cm Depth: 2cm Weight: 100g Waterproof: Yes Material: Acrylic Length: 9cm Size: 100ml Colour: ClearFeatures Flexible sealant for all fabric seams Waterproof and weather-resistant finish Ideal for tents, awnings, and outdoor gear Dries clear in 10-15 minutes Easy brush-on application Dries clear and transparent Seals pinholes and stitching perfectly Non-toxic